rod Posted January 30, 2008 Share #1 Posted January 30, 2008 Some one asked about repairing a cloudy sight glass on the break reservoir. I bought an old one from Jack off his old Maxim for my Virago. The site glass was cloudy and the mirror mount was broken and here is what I did. To repair the sight glass I used super glue and just coated the lens with it with it laying horizontal when it dried it was clear; not totally flat but good enough to see clearly the level. On the mirror mount I had a set of adapters that go from 10mm left hand thread to right hand thread (for the right side mirror). The piece that was broken was less than half the threads so I screwed the adapter in as best I could and used JB weld to glue the adapter into place so I have good threads. On the left I just screwed the adapter in so both sides look the same. Hope this helps. Rod Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now