MotoComm Headset

[Dusty]

I have an old Motocomm headset that I used on my V-star connected to a small CB. Does anyone know if I can get an interface connection cable to hook up between that and the 5 pin Yamaha connector?
I will eventually go for a J&M set but for now I'd like to use the existing headset I have.
Any info is appreciated.

[sarges46]

J+M might have what you need or Edsets may make something if they dont have it.

[Eddie Fulmer]

Me thinks you might have better luck finding hen's teeth:080402gudl_prv:

[stardbog]

I Use to have Autocom Headset and never found stuf to interconnect Autocom And 5 Pin Venture set.
Better take look on this web site and buy this headset.
http://www.wingstuff.com/pgroup_detail/40_Home_Monthly_Specials/2310_J_M_HS8154_Headset_for_Goldwing_w_1Piece_Cord/?goto=%2F

I Have now in my two helmets and sound quality is GREAT.

[gitarzan]

I've that same JM set. No complaints, esp. for that price.

[r-retzke]

An Autocom headset can work with the Venture and similar DIN 180º 5-pin systems. This attachment shows how.

Rog in NH

13285

[Kurt Leopold]

where can I find who sells the edsets I see mentioned?

[Freebird]

http://www.edsets.com/

:)

[george c]

http://www.edsets.com/edsets_adapters

[DragonRider]

I have that setup on my Vstar 1300 and I tried to swap speakers for better sound quality and found out that my J&M had 3 wire speakers vs 2 wire for the MotoCom. setup, I also tried a converter plug, that didnt work either, They must use a different wiring for the mike and speakers than the J&M, if you do succede, please let me know, I havent been able to find anything, so I have to have 2 helmets with different headsets, 1 for each bike. Good Luck.


I have an old Motocomm headset that I used on my V-star connected to a small CB. Does anyone know if I can get an interface connection cable to hook up between that and the 5 pin Yamaha connector?
I will eventually go for a J&M set but for now I'd like to use the existing headset I have.
Any info is appreciated.