Freebird
08-25-2006, 09:00 AM
Gas Tank Removal
Removing the gas tank on the RSV or the Royal Star Tour deluxe is very simple. The question does come up here from time to time though so here are some simple step by step instructions. RSTD may vary slightly.
http://www.venturerider.org/gastank/tank1%20(Small).jpg
Step 1: Remove the cowling around the gas cap.
http://www.venturerider.org/gastank/tank2%20(Small).jpg
Step 2: Use a pair of pliars to squeeze the tabs to unplug connector from metal tab.
http://www.venturerider.org/gastank/tank3%20(Small).jpg
Step 3: Unplug the connector.
http://www.venturerider.org/gastank/tank4%20(Small).jpg
Step 4: Remove the vent hose.
http://www.venturerider.org/gastank/tank5%20(Small).jpg
Step 5: Remove single bolt on rear tang of tank.
http://www.venturerider.org/gastank/tank6%20(Small).jpg
Step 6: Remove push pins that hold bib in place.
http://www.venturerider.org/gastank/tank7%20(Small).jpg
Step 7: Rubber covers just pull off front mounts. Remove covers and then allen head screws.
http://www.venturerider.org/gastank/tank8%20(Small).jpg
Step 8: Turn fuel petcock to "OFF" position and them remove gas line.
http://www.venturerider.org/gastank/tank9%20(Small).jpg
Step 9: Simply lift tank off and set it aside. You are done.
Removing the gas tank on the RSV or the Royal Star Tour deluxe is very simple. The question does come up here from time to time though so here are some simple step by step instructions. RSTD may vary slightly.
http://www.venturerider.org/gastank/tank1%20(Small).jpg
Step 1: Remove the cowling around the gas cap.
http://www.venturerider.org/gastank/tank2%20(Small).jpg
Step 2: Use a pair of pliars to squeeze the tabs to unplug connector from metal tab.
http://www.venturerider.org/gastank/tank3%20(Small).jpg
Step 3: Unplug the connector.
http://www.venturerider.org/gastank/tank4%20(Small).jpg
Step 4: Remove the vent hose.
http://www.venturerider.org/gastank/tank5%20(Small).jpg
Step 5: Remove single bolt on rear tang of tank.
http://www.venturerider.org/gastank/tank6%20(Small).jpg
Step 6: Remove push pins that hold bib in place.
http://www.venturerider.org/gastank/tank7%20(Small).jpg
Step 7: Rubber covers just pull off front mounts. Remove covers and then allen head screws.
http://www.venturerider.org/gastank/tank8%20(Small).jpg
Step 8: Turn fuel petcock to "OFF" position and them remove gas line.
http://www.venturerider.org/gastank/tank9%20(Small).jpg
Step 9: Simply lift tank off and set it aside. You are done.