Leveling Links - Raising the Rear of the RSV [Archive]

View Full Version : Leveling Links - Raising the Rear of the RSV

Freebird

08-22-2006, 02:08 AM

http://www.venturerider.org/dogbones/dogbon5.jpg
http://www.venturerider.org/dogbones/dogbon6.jpg

NOTE: For those of you who do not feel comfortable or don't have the tools to make your own leveling links, they are also available from Diamond R Accessories. An excellent vendor with great products. You can find them at http://www.diamondraccessories.com

V7Goose

11-30-2006, 07:31 PM

I changed the links on my 05 RSV without removing anything except the two nuts and bolts. My bike is stock with all the AIS stuff, and I did not have any problem at all. Don't do more than you need to!
Goose

Freebird

04-15-2010, 08:18 AM

I received the following note from one of our members regarding the Carbon_One lift adapter. Just a little heads up for those of you who might run into a problem with it. The lift adapter is almost a must have item for our bikes but this may be one case where you won't use it.

"Today I installed leveling links and ran into trouble by using the Carbon One adapter. With the adapter I was unable to get one of the bolts out of the way. I had to lower the bike - remove the adapter, jack it up again, and then it was easy."