Rear turn signal/tail light mod.

[Katydid]

Hey folks, does anyone know of a kit that turns your rear turn signals into a combination tail light/turn signal? I own a '06 RSV. I have a friend who bought such a kit from HD, and it really looks great. T/Y!!

[awsmsrv]

Try this. I've got the Dynamic Clusters. Scroll down this page (http://customdynamics.com/yamaha_turn_signal_retro.htm) to see them.

[EasyRider]

just when I THOUGHT I was thru adding lights to the back ya had ta post this!!!!!!!!:225:

[Wrongway]

or here http://electricalconnection.com/other-lighting/tsk-star&sport.htm for another alternative.

[Crash]

I have the KURYAKYN module that makes your rear turn signals RUN, BRAKE LIGHTS.

<!-- SQLQuery = [SELECT Categories.*, ProductInCategories.*, Products.*, Products.Description AS ProdDescription, Categories.Description AS CatDescription, Categories.OnBikeGraphic AS CatOnBike FROM Categories, ProductInCategories, Products WHERE Categories.CategoryID = ProductInCategories.CategoryID AND ProductInCategories.ProductID = Products.ProductID AND Categories.CategoryID = 2967 AND Products.BeginAvailableDate <= "2006-9-14 0:0:0" AND "2006-9-14 0:0:0" <= Products.EndAvailableDate AND Products.UnitPrice > 0 AND Products.ComingSoon <> 'True' ORDER BY Products.SortOrder, Products.SKU ] --> <TABLE id=Table1 height="125%" cellSpacing=0 cellPadding=0 width="101%" bgColor=#8c969a border=0><!-- logo row --><TBODY><TR><TD vAlign=bottom width=322>http://www.kuryakyn.com/graphics/h_kuryakyn_logo_small_darkg.gif</TD><!-- vert border --><TD vAlign=top background=/graphics/whitedot.gif>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><!-- padding --><TD vAlign=top>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><TD vAlign=top width=428><TABLE id=Table2 cellSpacing=0 cellPadding=0 width=width=100% border=0><TBODY><TR><TD vAlign=top width=300>http://www.kuryakyn.com/graphics/filler_trans.gif

Run-Turn-Brake Controller
http://www.kuryakyn.com/graphics/filler_trans.gif

</TD><TD vAlign=top width="100%"></TD></TR></TBODY></TABLE></TD><TD vAlign=top width="100%">http://www.kuryakyn.com/graphics/filler_trans.gif
</TD></TR><TR><!-- horiz border --><TD background=/graphics/whitedot.gif colSpan=5>http://www.kuryakyn.com/graphics/filler_trans.gif</TD></TR><!-- link row --><TR><TD vAlign=top width=322>

</TD><!-- vert border --><TD vAlign=top background=/graphics/whitedot.gif>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><!-- padding --><TD vAlign=top>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><TD vAlign=center width=428>// ABOUT APPLICATIONS // (javascript:openfixedwindow('fitments.asp','fitWin dow',432,330))
</TD><TD vAlign=top width="100%">http://www.kuryakyn.com/graphics/filler_trans.gif
</TD></TR><TR><!-- horiz border --><TD background=/graphics/whitedot.gif colSpan=5>http://www.kuryakyn.com/graphics/filler_trans.gif</TD></TR><!-- product photo/description row --><TR><TD vAlign=top><TABLE id=Table3 cellSpacing=0 cellPadding=0 width="100%" border=0><TBODY><TR><TD vAlign=top colSpan=3>http://www.kuryakyn.com/graphics/products/popup/11965_kur_4710_tt_u_pu.jpg
</TD></TR><TR><TD vAlign=top background=/graphics/h_photo_border.gif colSpan=3>http://www.kuryakyn.com/graphics/filler_trans.gif</TD></TR><TR><TD vAlign=top>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><TD vAlign=top>
A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, and brake lights! The module wires in beneath your seat and is intended for use with L.E.D. or Halogen Silver Bullets or other custom turn signals you have installed on your bike. The unit will work fine with stock turn signals as well, but you will have to find red lenses from another source.
</TD><TD vAlign=top>http://www.kuryakyn.com/graphics/filler_trans.gif</TD></TR></TBODY></TABLE></TD><!-- vert border --><TD vAlign=top background=/graphics/whitedot.gif>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><!-- padding --><TD vAlign=top>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><TD vAlign=top><!-- product copy --><TABLE id=Table4 cellSpacing=0 cellPadding=0 width=width=100% border=0><TBODY><TR><TD vAlign=top width=300><!-- A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, and brake lights! The module wires in beneath your seat and is intended for use with L.E.D. or Halogen Silver Bullets or other custom turn signals you have installed on your bike. The unit will work fine with stock turn signals as well, but you will have to find red lenses from another source.
-->http://www.kuryakyn.com/graphics/filler_trans.gif
</TD><TD vAlign=top width="100%">http://www.kuryakyn.com/graphics/filler_trans.gif
</TD></TR><TR><TD vAlign=top><TABLE id=Table5 cellSpacing=0 cellPadding=0 width="100%" border=0><TBODY><TR><TD vAlign=top colSpan=2>_4710 // $59.99 _ORDER NOW (javascript:gotopage('shopping/addprod.asp?pn=4710'))

</TD></TR><TR><TD vAlign=top width="1%">http://www.kuryakyn.com/graphics/filler_trans.gif</TD><TD vAlign=top width="99%">Run-Turn-Brake Controller for Metric Cruisers (ea)
</TD></TR><TR><TD vAlign=top colSpan=2>_INSTALLATION INSTRUCTIONS (http://www.kuryakyn.com/documents/installation/4710-25HD-0706.pdf)


</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE></TD><TD vAlign=top width="100%">http://www.kuryakyn.com/graphics/filler_trans.gif
</TD></TR><!-- footer links row --><TR><TD vAlign=top width=322>

</TD><!-- vert border --><TD vAlign=top background=/graphics/whitedot.gif>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><!-- padding --><TD vAlign=top>http://www.kuryakyn.com/graphics/filler_trans.gif</TD><TD vAlign=top width=428><NOBR>_VIEW SHOPPING CART (javascript:gotopage('/shopping/index.asp')) _CLOSE WINDOW (javascript:closewindow()) _VIEW WISH LIST (javascript:gotopage('/wishlist.asp'))</NOBR>
</TD><TD vAlign=top width="100%">http://www.kuryakyn.com/graphics/filler_trans.gif
</TD></TR><!-- link row --><TR><TD></TD><!-- vert border --><TD vAlign=top background=/graphics/whitedot.gif height="100%">http://www.kuryakyn.com/graphics/filler_trans.gif</TD><TD></TD><TD></TD><TD></TD></TR></TBODY></TABLE>

[Boomerbiker]

I just worked with a friend to install the LED set from Electrical Connection that Allan referred to. It was a good experience, but a little work to remove and reinstall the pigtails under the fender that connect to the wiring harness behind the license plate bracket.

A lot more light when you hit the stoppers.

Bill

[Lone Eagle]

just when I THOUGHT I was thru adding lights to the back ya had ta post this!!!!!!!!:225:


Just think how safe you will be with some extra lights on the back AND sides!!!:cool10: :stirthepot:

[SNOW700R]

I bought a kit from Nopork.com. Turns rear signals into running lamps & brake lamps. Works great,much better rear visibility,wife feels much safer also.

[Katydid]

Thanks all!! Donb't know how we ever survuved without the 'net. Dave

[Jdix]

I was also looking for a way to brighten up the back. The Custom Dynamics' Dynamic Clusters look like a good solution, especially with the smoked or clear lenses, but it appears to me that they are not DOT approved.

Does anyone know why they might not be approved for the street and what problems one might have using such a system?

Jdix

[awsmsrv]

I was also looking for a way to brighten up the back. The Custom Dynamics' Dynamic Clusters look like a good solution, especially with the smoked or clear lenses, but it appears to me that they are not DOT approved.

Does anyone know why they might not be approved for the street and what problems one might have using such a system?

Jdix

True, they aren't DOT approved, however, I only think it would be an issue if you were pulled over for something else AND gave the cop a hard time AND if he even knew they weren't approved. I haven't had any problems with them. I guess it comes down to this: "Use at your own risk."

[CHROME ADDICTION]

Boomerbiker wrote:


"I just worked with a friend to install the LED set from Electrical Connection that Allan referred to. It was a good experience, but a little work to remove and reinstall the pigtails under the fender that connect to the wiring harness behind the license plate bracket.

A lot more light when you hit the stoppers.

Bill"

-----------------------------------------------------------------

<!-- / message -->
Does anyone have any suggestions on how to run the wires for the led's thru the post on my '05 Venture? I have unscrewed both the tail and turn lights. It looks extremely tight to get the led wires thru where the plug is currently located . Any suggestions are greatly appreciated.

Steve
<!-- / message -->