Cougar
09-30-2007, 06:07 PM
I Just received the Buddyrich cable last week and had some time today
to install it. I like some of you need pictures and and maybe how too
Instructions.
# 1 Remove Fairing
# 2 Looking from the front of the bike on the left you will see this cluster
of color connectors (Lift the RED Connector up a bit and un-plug it.
12495 12496
12501
# 3 I put a little DIELECTRIC grease in the cables
12507 12502
# 4 Now take the BuddyRich Cable and plug it into each of the bikes
corresponding cables.
12503 12504
# 5 This is what it looks like after the New Cable is plugged in.
12505
# 6 Take some Black Electrical Tape and wrap them up to help
water proof them.
12506
# 7 Run the Small wire from the BuddyRich Cable through your fairing
up the (MICROPHONE IN-PORT) on the Zumo Cradle
12497 12510
# 8 Turn Zumo on and make it find your Cell Phone.. (TEST IT)
Plug your helmet into your bike connector like always then have your
Radio System on AUX switch to headset and make your call.
I also Ran my Other 3.5 Connector in the AUX Port on the Zumo Cradle
For my Loaded MP3 Music that I play from my Zumo.
12498 12508
12509
My Findings Were More then I Expected.
The set-up worked perfect. I first called my Daughter from the bike with
my helmet on from the garage. she could her me perfect and I could here
her perfect as well.
Then I Had my Wife come out and put her helmet on she could hear the call being made and My Daughter talking to me. My wife could not talk to our Daughter. But she could tell me what to say to her from helmet to helmet. Also , with the Zumo's MP3's Playing it will Mute it when the call
is being made or coming in. I also was able to have the speakers on the bike on (not the H/S) and hear and talk to my Daughter.
So for the price this set-up works PERFECT!
Thanks Buddy for taking the time and making these cables for us.
(Buddy make sure you add anything else I Forgot before Don puts
this into the TECH Files.)
I Hope this helps some of you folks.
(not sure why these two photos are at the bottom of this page)
Jeff
to install it. I like some of you need pictures and and maybe how too
Instructions.
# 1 Remove Fairing
# 2 Looking from the front of the bike on the left you will see this cluster
of color connectors (Lift the RED Connector up a bit and un-plug it.
12495 12496
12501
# 3 I put a little DIELECTRIC grease in the cables
12507 12502
# 4 Now take the BuddyRich Cable and plug it into each of the bikes
corresponding cables.
12503 12504
# 5 This is what it looks like after the New Cable is plugged in.
12505
# 6 Take some Black Electrical Tape and wrap them up to help
water proof them.
12506
# 7 Run the Small wire from the BuddyRich Cable through your fairing
up the (MICROPHONE IN-PORT) on the Zumo Cradle
12497 12510
# 8 Turn Zumo on and make it find your Cell Phone.. (TEST IT)
Plug your helmet into your bike connector like always then have your
Radio System on AUX switch to headset and make your call.
I also Ran my Other 3.5 Connector in the AUX Port on the Zumo Cradle
For my Loaded MP3 Music that I play from my Zumo.
12498 12508
12509
My Findings Were More then I Expected.
The set-up worked perfect. I first called my Daughter from the bike with
my helmet on from the garage. she could her me perfect and I could here
her perfect as well.
Then I Had my Wife come out and put her helmet on she could hear the call being made and My Daughter talking to me. My wife could not talk to our Daughter. But she could tell me what to say to her from helmet to helmet. Also , with the Zumo's MP3's Playing it will Mute it when the call
is being made or coming in. I also was able to have the speakers on the bike on (not the H/S) and hear and talk to my Daughter.
So for the price this set-up works PERFECT!
Thanks Buddy for taking the time and making these cables for us.
(Buddy make sure you add anything else I Forgot before Don puts
this into the TECH Files.)
I Hope this helps some of you folks.
(not sure why these two photos are at the bottom of this page)
Jeff